File Size: 101 Kb
Notes: Fuses and circuit breakers shown are for short-circuit ground fault protection only. This data applies to Normal Service applications of switches, starters or breakers shown. Do not use for Heavy Service applications, as defined in the latest Catalog Digest. Data is based on information available at time of publication and is subject to change. See actual installed equipment and Section 110-14C for termination requirements. Fuse sizes and circuit breaker trip amperes are approximate selections suitable for most installations. Thermal unit selectors are not based on NEC currents (see NEC 430-6) but are selected from average full load currents. Thermal units can be more accurately selected using table furnished with starter and full load current marked on the motor name plate.
Instructions
Motor Calculator :-
- Three Phase and Single Phase
- Click on the Voltage and HP to view information for your application
Transformer Data :-
- Enter the KVA and Voltage to view three-phase and single-phase currents
Scheduler :-
- Enter the Start Date (MM/DD/YYYY format) and the number of weeks to view the resulting End Date. Helpful in determining ship dates and project schedules.
Wire and Conduit Page :-
- Use the dropdown list to select wire size to view information.
Voltage Drop :-
- Select wire size as before.
- Enter the cable run distance in multiples of 100 ft. (i.e.. 100ft - 1)
- Enter the amperage you will be drawing through the wire.
- View the voltage drop based on PF.
You May Also Like These Books:-
No comments:
Post a Comment