File Size: 157 Kb
Notice to Users:
These spreadsheet templates are provided as-is.
No representations or warranties are made regarding their suitability for a particular application. The author of these templates has no control over their application and therefore accepts no responsibility for their use. The author believes the templates accurately perform the calculations described in the documentation, but it is the responsibility of the user to confirm that the template is
performing the calculations anticipated by the user. It should be recognized that the calculations performed by these templates incorporate certain assumptions and approximations regarding the
chemical and physical processes being modeled. People using and reviewing calculations performed with these templates should be familiar with the limitations associated with their use.
performing the calculations anticipated by the user. It should be recognized that the calculations performed by these templates incorporate certain assumptions and approximations regarding the
chemical and physical processes being modeled. People using and reviewing calculations performed with these templates should be familiar with the limitations associated with their use.
ATRIATMP.XLS: Estimate of atrium smoke temperature
BUOYHEAD.XLS: Buoyant gas head, velocity and flow caused by a smoke layer
BURNRATE.XLS: Estimate of fuel burning rate history
CJTEMP.XLS: Estimate of temperature rise in unconfined and confined ceiling jets
DETACT.XLS: Estimate of the response time of ceiling mounted fire detectors
FLAMSPRD.XLS: Calculation of lateral flame spread velocity
FLASHOVR.XLS: Estimates of the HRR needed to cause flashover(F/O)
FUELDATA.WQ1: Thermophysical and burning rate data for some common fuels
GASCONQS.XLS: Estimate of gas species concentrations under quasi-steady fire conditions
IGNTIME.XLS: Estimate of the time to ignite a thermally thick solid exposed to a constant heat flux
LAYDSCNT.XLS: Smoke layer descent rate due to entrainment only
LAYERTMP.XLS: Estimate of upper layer temperature using modified MQH correlation
LINEFIRE.XLS: Estimate of the mass balance for a compartment with a single wall opening and a line fire
MASSBAL.XLS: Estimate of the mass flow rate for a compartment with a single wall opening
MECHVENT.XLS: Estimate of fire conditions in a mechanically ventilated space
PLUMEFIL.XLS: Estimate of the volumetric rate of smoke flow in a plume
PLUMETMP.XLS: Estimate of temperature rise in a fire plume
RADIGN.XLS: Radiant ignition of a near fuel
ROOFVENT.XLS: Smoke flow through a roof vent
STACK.XLS: Smoke flow rate through vents under influence of stack effect and buoyancy
TEMPRISE.XLS: Estimate of the average temperature rise in a closed room fire
THERMPRP.XLS: Thermal properties of boundary materials
These Excel Sheet Designed By:
"Frederick W. Mowrer, Ph.D."
You May Also Like These E-Books:-
No comments:
Post a Comment