File Size: 979 Kb
In these Excel sheet we can calculate the following parameters :-
1. Geotechnical Analysis
2.Structural Design
What is Geotechnical Analysis ?
What is Geotechnical Analysis ?
Geotechnical analysis is executed by geotechnical engineers or geologists to acquire information regarding the physical characteristics of soil and rock. These details are used to design foundations for planned structures and for repairs necessitated due to subsurface conditions. These investigations will include the subsurface and surface examination of a site. Subsurface investigations generally involve the sampling of soil and laboratory tests. To attain information regarding the conditions of soil below the surface, subsurface exploration may be necessary. Techniques of subsurface examination include obtaining samples, use of test pits, boring, and in situ tests. Surface exploration can include geologic mapping, or it can be only physical observation to examine the environment at the site.
What is Structural Design ?
Structural design is the methodical investigation of the stability, strength and rigidity of structures. The basic objective in structural analysis and design is to produce a structure capable of resisting all applied loads without failure during its intended life. The primary purpose of a structure is to transmit or support loads. If the structure is improperly designed or fabricated, or if the actual applied loads exceed the design specifications, the device will probably fail to perform its intended function, with possible serious consequences. A well engineered structure greatly minimizes the possibility of costly failures.
What is Structural Design ?
Structural design is the methodical investigation of the stability, strength and rigidity of structures. The basic objective in structural analysis and design is to produce a structure capable of resisting all applied loads without failure during its intended life. The primary purpose of a structure is to transmit or support loads. If the structure is improperly designed or fabricated, or if the actual applied loads exceed the design specifications, the device will probably fail to perform its intended function, with possible serious consequences. A well engineered structure greatly minimizes the possibility of costly failures.
Structural design process :-
A structural design project may be divided into three phases, i.e. planning, design and construction.
Planning: This phase involves consideration of the various requirements and factors affecting the general layout and dimensions of the structure and results in the choice of one or perhaps several alternative types of structure, which offer the best general solution. The primary consideration is the function of the structure. Secondary considerations such as aesthetics, sociology, law, economics and the environment may also be taken into account. In addition there are structural and constructional requirements and limitations, which may affect the type of structure to be designed.
Design: This phase involves a detailed consideration of the alternative solutions defined in the planning phase and results in the determination of the most suitable proportions, dimensions and details of the structural elements and connections for constructing each alternative structural arrangement being considered.
Construction: This phase involves mobilization of personnel; procurement of materials and equipment, including their transportation to the site, and actual on-site erection. During this phase, some redesign may be required if unforeseen difficulties occur, such as unavailability of specified materials or foundation problems.
You May Also Like These E-Books:-
No comments:
Post a Comment